Zodiac IQ Voyager Automatic Pool Cleaner

A Practical Solution for Complete Pool Cleaning

Pool debris does not remain on the bottom. Fine particles accumulate across the surface, dirt reaches the walls and the water line requires regular attention. The Zodiac Voyager range combines autonomous movement, active brushing, cyclonic suction and progressive filtration so these cleaning areas are handled during an automatic cycle.

Identity: Zodiac Voyager RE4400 iQ and RE4600 iQ are automatic electric robotic pool cleaners designed for autonomous cleaning of residential swimming pool floors, walls and water lines.

The robot works independently from the pool filtration circuit. Its own suction and filter system collects debris inside the cleaner, avoiding the need to connect the robot to the skimmer or pool suction line.

From Repetitive Cleaning to Autonomous Pool Coverage

Once submerged and started, Voyager moves independently through the pool. Its tracked propulsion works together with onboard intelligent sensors to manage movement across different shapes and bottom profiles. Front and rear helical brushes act directly on the pool surface while cyclonic suction carries loosened material into the filtration system.

Progressive filtration separates mixed debris through successive filtration stages. After the cleaning cycle, the rigid basket is reached directly from the top. The transparent window provides a quick visual check of the filter area before opening the cleaner.

Cleaning coverage depends on pool geometry, surface condition, debris load, water condition and correct maintenance. Steps, unusual obstacles and complex structural details influence the path of any autonomous pool cleaner.

Choose the Right Voyager Version

Voyager RE4400 iQ

The RE4400 iQ provides the core Voyager cleaning platform with iAquaLink connectivity and remote On and Off operation. It is the appropriate configuration when autonomous floor, wall and water line cleaning is the priority and the additional Lift System and supplied trolley of the RE4600 iQ are not required.

Voyager RE4600 iQ

The RE4600 iQ adds the higher level convenience functions. Its iAquaLink implementation provides advanced remote functionality and manual cleaning time adjustment. The Lift System assists removal from the swimming pool, while the transport trolley is supplied as standard equipment.

Why Voyager Stands Out

Cyclonic Suction

Zodiac's patented cyclonic suction maintains debris movement within the suction flow. Combined with the helical brush arrangement, the system performs both mechanical surface action and active debris collection during the cleaning cycle.

Progressive Filtration

The standard filtration arrangement uses two successive filtration levels. This configuration addresses pools where larger visible material and finer debris occur together instead of relying on one filtration grade for every type of contamination.

Intelligent Navigation

An accelerometer and gyroscope support the cleaner's navigation system. Combined with tracked propulsion, these sensors help Voyager adapt its movement to the pool environment rather than depending only on a fixed repetitive route.

Easy Filter Access

Routine filter maintenance does not require turning the robot over. The rigid filter is removed from above, while the transparent window helps the user inspect the filter area during normal use.

Additional RE4600 iQ Handling

The Lift System available on the RE4600 iQ directs the cleaner toward the selected wall for removal. Water is discharged as the cleaner reaches the extraction position, reducing the amount of retained water that must be lifted with the robot.

Compatibility and Exclusions

• Compatible pool types: Inground pools and above ground pools with rigid walls.
• Compatible shapes: Rectangular, oval and free form pools.
• Compatible surfaces: Tiles, liner, polyester, reinforced PVC and painted concrete.
• Cleaning areas: Floor, walls and water line.
• Pool filtration connection: Not required.
• Shock treatment: Remove the cleaner from the pool during chemical shock treatment.
• Stainless steel pools: Delicate stainless steel surfaces require particular care because friction from debris, tracks or brushes can produce surface marks.
• Connected operation: iAquaLink functions require a suitable wireless network at the installation location.
• Water source: Manufacturer warranty conditions exclude use of borehole water, well water and rainwater.

Extractable Technical Specifications

• Brand: Zodiac
• Product family: Voyager
• Models: RE4400 iQ, RE4600 iQ
• RE4400 iQ SKU: WR000327
• RE4600 iQ SKU: WR000323
• Product type: Automatic electric robotic pool cleaner
• Recommended maximum pool size: 12 x 6 m
• Cleaning areas: Floor, walls and water line
• Number of motors: 3
• Robot dimensions: 43 x 40 x 30 cm
• Robot weight: 8 kg
• Control unit supply: 200 to 240 VAC, 50 to 60 Hz
• Robot supply: 30 VDC
• Absorbed power: 150 W
• Energy source: Autonomous, mains connection upstream of transformer
• Cable length: 18 m
• Drive system: Tracks, 2 drive motors
• Movement: Pre programmed
• Brushes: Front and rear helical brushes
• Filter surface: 1066 cm²
• Filter capacity: 4 L
• Standard filtration: Two stage 150 µm and 60 µm
• Theoretical cleaning width: 23 cm
• Number of cleaning cycles: 2
• Bottom only cycle: 1 hour 30 minutes
• Floor, walls and water line cycle: 2 hours 30 minutes
• Filter system: Rigid filter with top access
• Transparent window: Yes
• Filter full indicator: No
• Pressure sensor: No
• Water temperature measurement: No
• RE4400 iQ remote function: On and Off through iAquaLink
• RE4400 iQ Lift System: No
• RE4600 iQ remote function: Advanced remote control through iAquaLink
• RE4600 iQ cleaning time adjustment: Yes
• RE4600 iQ Lift System: Yes
• Safety: Beach system, out of water safety and electronic motor protection
• Warranty: 3 years, subject to manufacturer warranty conditions

Getting the Best Results

• Position and connect the control unit according to the manufacturer's electrical safety instructions.
• Unroll the cable before placing the cleaner into the pool.
• Submerge the robot and allow trapped air to escape completely.
• Select the cleaning cycle appropriate to the areas requiring attention.
• Use iAquaLink for the connected functions available on the selected model.
• Use the Lift System on the RE4600 iQ when removing the cleaner from the pool.
• Do not remove either cleaner by pulling directly on its floating cable.
• Remove and rinse the filter after cleaning, particularly following a heavy debris load.
• Inspect the brushes, tracks, filter and cable periodically for wear and trapped debris.
• Remove the cleaner before carrying out a shock treatment.

Equivalence and Model Mapping

• Product family: Zodiac Voyager robotic pool cleaners.
• Alternative configuration: RE4400 iQ and RE4600 iQ are alternative equipment levels within the same Voyager platform.
• RE4400 iQ: Core connected configuration without Lift System.
• RE4600 iQ: Higher equipment configuration with advanced remote functions, Lift System and trolley.
• Not the same as: RE4400 iQ WR000327 and RE4600 iQ WR000323 are separate factory references.

Why Purchase Your Voyager from LordsWorld

LordsWorld supplies the Zodiac Voyager RE4400 iQ and RE4600 iQ for delivery within Italy and supported EU destinations. Our team can verify the selected model against the pool type, surface and intended use before dispatch where compatibility requires confirmation.

Technical support continues with clear identification of the purchased factory reference, compatible accessories and warranty documentation. Retain the purchase invoice, identification label and original serial number because these are relevant to manufacturer warranty support.

Common Questions

Do both versions clean the walls and water line?

Yes. Both RE4400 iQ and RE4600 iQ provide automatic cleaning of the floor, walls and water line.

Do they connect to the pool filtration system?

No. Voyager is an autonomous electric cleaner with its own suction system and removable filter.

What is the main difference between RE4400 iQ and RE4600 iQ?

Their core cleaning architecture is closely related. RE4600 iQ adds advanced remote functionality, manual cleaning time adjustment, the Lift System and a transport trolley supplied as standard.

Does RE4400 iQ connect to iAquaLink?

Yes. The supplied dealer specification identifies iAquaLink basic functionality with remote On and Off control.

Which version is easier to remove from the pool?

RE4600 iQ is the appropriate version where assisted removal is important because it includes the Zodiac Lift System.

Available Options

Standard Equipment Shared by Both Versions

• Voyager robotic cleaner.
• Control unit.
• Two stage filtration.
• iAquaLink application access.

Voyager RE4400 iQ

• Factory SKU: WR000327
• Connected control: Basic iAquaLink functionality with remote On and Off.
• Lift System: Not included.
• Trolley: Optional.

Voyager RE4600 iQ

• Factory SKU: WR000323
• Connected control: Advanced iAquaLink functionality.
• Cleaning time adjustment: Included.
• Lift System: Included.
• Trolley: Included.

Optional Accessories

• Single 100 µm filter basket: R0897500
• Single 200 µm filter basket: R0897700
• Protective bag: R0568100
• Transport trolley for RE4400 iQ: R0639500