25kg dried granular sea salt for swimming pools 22608

€23.97

25kg of dried sea salt in granular form “22608” for use in swimming pools and water softeners.

High NaCl content of 99.6%.

Low sulphate content.

guarantees a clean and pure pleasure bath.

Advantage: It is not necessary to add chlorine to the pool water.

Maximum purity and it is ideal for all swimming pools with salt electrolysis, high solubility.

Product Information Request

The dispatch time for this product is 1 - 3 working days.

Calculate Shipping Cost

Rating

Read reviews (1)

SALT OF SARDINIA: dried sea salt for the disinfection of swimming pool water suitable for all swimming pools with salt electrolysis.

It is also excellent for use in water softeners.

It contains a high NaCl content of about 99.9% and a low sulphate content, a highly soluble quality salt that leaves no residues and guarantee a clean and pure pleasure.

How does it work?

An electrolysis system transforms the SALT which is then added to the pool water as chlorine.

ADVANTAGES:

It is not necessary to add chlorine to the pool water.

The saline electrolysis plant constantly transforms salt into chlorine.

The salt therefore guarantees clean and clear water. In addition, SARDINIA SALT offers a pleasant sensation on the skin without irritation or burns.

For the correct dosage, refer to the manufacturer's instructions of the saline electrolysis system.

Made in Italy, saline origin “Engineer. Luigi Conti Vecchi” of Cagliari.

Granulometry 3 mm - upper.

PHYSICAL CHEMICAL PROPERTIES

Chemical formula: NaCl

Formula weight: 58.45 g/mole

Chemical name: Sodium chloride

Bulk density: 1.2 t/mc

Appearance: White crystals

Solubility in water: (20 ° C) 360 g/l

PHYSICAL AND CHEMICAL CHARACTERISTICS
Item analytic	Typical value	The limits of the product	The analytical method
Humidity 105° C %	0.12	NULL	ISO 2483 – 1973 “Determination of loss in mass at 110° C (Moisture Conventional)”
Insoluble residue in water (% s.s.)	≤0.5	Max 0.5	ISO 2479 – 1972 “Determination of material insoluble in Water or Hydrochloric Acid and the preparation of the solution for the other determinations”
Title in sodium chloride (% s).s.)	99.6	Min 97	CX STAN J150 – 1985, Rev. 1 – 1997 Amed. 1 – 1999, Amed. 2 – 2001. (Indirect Calculation) “The indirect calculation allows the determination of the content of Sodium Chloride, based on dle title of Sulphates, Calcium, Magnesium, Potassium, and the insoluble residue in the water.”
Arsenic (mg/kg)	≤0.05	Max 0.5	EuSalt/AS 015-2007(ICP-OES)
Copper (mg/kg)	≤0.10	Max 2	EuSalt/AS 015-2007(ICP-OES)
Lead (mg/kg)	≤0.3	Max 2	EuSalt/AS 015-2007(ICP-OES)
Cadmium (mg/kg)	≤0.05	Max 0.5	EuSalt/AS 015-2007(ICP-OES)
Mercury (mg/kg)	≤0.02	Max 0.1	EuSalt/AS 015-2007(ICP-OES)

The analytical values mentioned are the average of a series of chemical-physical checks carried out by quality control.

residual humidity can vary from the values indicated, depending on the environmental conditions.

This technical data sheet is not intended to ensure the suitability of the product for its intended use, therefore it does not exempt the buyer from carrying out his own checks.