200g Multi-action Chlorine tablets - Slow dissolve trichlor

Useful Tips for Optimal Functionality

• Always check the water quality levels daily, especially after rainfall or strong winds.
• If there are significant changes, use a specific product for water treatment.
• Keep the water flow fully open in skimmers and bottom inlets during the filtration process.
• Regularly clean skimmer baskets to ensure proper tablet dissolution.
• Avoid direct contact of MULTI-ACTION TABLETS with pool surfaces made of polyester or vinyl to prevent discoloration.
• Add new tablets when those in the skimmers have reduced to 10% of their original weight.

Dosage and Usage

Initial Treatment:

• Add 15 g of DICHLORO GRANULAR per cubic meter of water.
• After two hours, adjust the pH between 7.2 and 7.6.

Maintenance Treatment:

• With the water's pH adjusted, add 1 MULTI-ACTION TABLET for every 15 cubic meters of water every 7 days.
• The dosages provided are indicative and may need to be adjusted based on the specific characteristics of each pool, climatology, etc.

The initial treatment should be repeated whenever there is a lack of water transparency. The free residual chlorine should be between 0.5 and 1.5 mg/l, which can be easily measured using a suitable chlorine and pH analyzer. This check should be performed at least twice a day. Insert the necessary dose of MULTI-ACTION TABLETS into the skimmer, thus activating the filtration system to allow the product to dissolve properly in the water circulating through the skimmer. It is essential that the entire volume of pool water is filtered daily by the filtration group.

Under normal use and in its original form, the product has no adverse effects on health and the environment. The information contained in this technical sheet is correct to the best of our knowledge, however, as the conditions under which this product is used are not under our direct control, we assume no responsibility for any damage resulting from its improper use.